3com S7906E Guide De Référence

 

1-26 

terminal type { ansi | vt100 } 

User interface view 

2: System level 

ansi: Specifies the terminal display type to ANSI. 

vt100: Specifies the terminal display type to VT100. 

Use the terminal type command to configure the type of terminal display . 

Use the undo terminal type command to restore the default.  

Currently, the system support two types of terminal display : ANSI and VT100. 

By default, the terminal display type is ANSI. The device must use the same display type as the terminal. 

If the terminal uses VT 100, the device should also use VT 100. 

# Set the terminal display type to VTY 100. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface vty 0 

[Sysname-ui-vty0] terminal type vt100 

user-interface [ type ] first-number [ last-number ] 

System view 

2: System level 

type: User interface type. 

first-number: User interface index, which identifies the first user interface to be configured. 

last-number: User interface index, which identifies the last user interface to be configured.