3com S7906E Guide De Référence

 

1-12 

display this [ by-linenum ] 

Any view 

1: Monitor level 

by-linenum: Specifies to display the number of each line. 

Use the display this command to display the validated configuration under the current view. 

After finishing a set of configurations under a view, you can use the display this command to check 

whether the configuration takes effect. 

Note that:  

z 

A parameter is not displayed if it has the default configuration. 

z 

A parameter is not displayed if the configuration has not taken effect. 

z 

When you use the command in a user interface view, the command displays the valid configuration 

in all the user interfaces. 

z 

When you execute the command in any VLAN view, the command displays configuration of all the 

VLANs. 

# Display the valid configuration information of the current view (the output information depends on the 

current configuration of the device). 

<Sysname> system-view 

[Sysname] user-interface vty 0 

[Sysname-ui-vty0] display this 

# 

user-interface aux 0 

user-interface vty 0 

 history-command max-size 256 

user-interface vty 1 4 

# 

return 

# Display the valid configuration information on interface Ethernet 2/0/1 (the output information depends 

on the current configuration of the device). 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] display this 

# 

interface Ethernet2/0/1