3com S7906E Guide De Référence

 

1-18 

RX power(dBM) 

Digital diagnosis parameter-RX power, in dBM, 
with the precision to 0.01 dBM. 

TX power(dBM) 

Digital diagnosis parameter-TX power, in dBM, 
with the precision to 0.01 dBM. 

 

display transceiver interface [ interface-type interface-number ]  

Any view 

2: System level 

interface [ interface-type interface-number ]: Displays main parameters of the pluggable transceiver 

plugged in the specified interface. interface-type interface-number represents interface type and 

interface number. If it is not specified, the command displays main parameters of the pluggable 

transceiver(s) in all the interfaces. 

Use the display transceiver command to display main parameters of a single or all pluggable 

transceivers. 

# Display main parameters of the pluggable transceiver plugged in interface GigabitEthernet 2/0/3. 

<Sysname> display transceiver interface gigabitethernet 2/0/3 

GigabitEthernet2/0/3 transceiver information: 

  Transceiver Type              : 1000_BASE_SX_SFP 

  Connector Type                : LC 

  Wavelength(nm)                : 850 

  Transfer Distance(m)          : 550(50um),270(62.5um) 

  Digital Diagnostic Monitoring : YES 

  Vendor Name                   : H3C 

  Ordering Name                 : SFP-GE-SX-MM850 

Table 1-8 display transceiver command output description 

Connector Type 

Type of the connectors of the transceiver: 

z 

Optical connectors, including SC (SC connector, developed 
by NTT) and LC (LC connector, 1.25 mm/RJ-45 optical 
connector developed by Lucent). 

z 

Other connectors, including RJ-45 and CX 4.