3com S7906E Guide De Référence

 

1-23 

z 

If you do not specify the slot keyword, or reboot the active main board, the execution of the reboot 

command results in the reboot of the whole device. 

z 

Device reboot may result in the interruption of the ongoing services. Be careful to use these 

commands. 

z 

If a main boot file fails or does not exist, the device cannot be rebooted with this command. In this 

case, you can re-specify a main boot file to reboot the device, or you can power off the device, then 

power it on and the system automatically uses the backup boot file to restart the device. 

z 

If you are performing file operations when the device is to be rebooted, the system does not 

execute the command for the sake of security. 

 

# If the current configuration does not change, reboot the device. 

<Sysname> reboot 

 Start to check configuration with next startup configuration file, please wait.........DONE! 

 This command will reboot the device. Continue? [Y/N]:y 

Starting...... 

# If the current configuration changes, reboot the device. 

<Sysname> reboot 

 Start to check configuration with next startup configuration file, please wait.........DONE! 

  This command will reboot the device. Current configuration will be lost in next startup if 

you continue. Continue? [Y/N]:y 

Starting...... 

reset unused porttag 

User view 

1: Monitor level 

None 

Use the reset unused porttag command to clear the 16-bit index saved but not used in the current 

system. 

A confirmation is required when you carry out this command. If you fail to make a confirmation within 30 

seconds or enter “N” to cancel the operation, the command will not be carried out.