3com S7906E Guide De Référence

 

1-27 

 

# Configure the device to reboot at 12:00 AM (supposing that the current time is 11:43). 

<Sysname> schedule reboot at 12:00 

Reboot system at 12:00 06/06/2006(in 0 hour(s) and 16 minute(s)) 

confirm? [Y/N]: 

# If you have used the terminal logging command to enable the log display function on the terminal 

before setting a reboot time, the system will automatically display related log information after you enter 

<y>. By default, the log display function is enabled. 

<Sysname> 

%Jun  6 11:43:11:629 2006 Sysname CMD/5/REBOOT: 

vty0(192.168.1.54): Set schedule reboot parameters at 11:43:11 06/06/2006, and system will 

reboot at 12:00 06/06/2006. 

schedule reboot delay { hh:mm | mm } 

User view 

3: Manage level 

hh:mm: Device reboot wait time, in the format of hh:mm (hours:minutes). The value of the hh argument 

ranges from 0 to 720, and the value of the mm argument ranges from 0 to 59, and the value of the 

hh:mm argument cannot exceed 720:00. 

mm: Device reboot wait time in minutes, in the range of 0 to 43,200. 

Use the schedule reboot delay command to enable the scheduled reboot function and set a reboot 

wait time. 

Use the undo schedule reboot command to disable the scheduled reboot function. 

By default, the scheduled reboot function is disabled. 

Note that:  

z 

The reboot wait time can be in the format of hh:mm (hours:minutes) or mm (absolute minutes). The 

absolute minutes cannot exceed 30 x 24 x 60 minutes, namely, 30 days. 

z 

The precision of the device timer is 1 minute. One minute before the reboot time, the device will 

prompt “REBOOT IN ONE MINUTE” and will be rebooted in one minute.