3com S7906E Guide De Référence

 

2-13 

Use the display ftp client configuration command to display the configuration information of the FTP 

client. 

 

Currently this command displays the configured source IP address or source interface of the FTP client. 

Related commands: ftp client source. 

# Display the current configuration information of the FTP client. 

<Sysname> display ftp client configuration 

The source IP address is 192.168.0.123 

ftp [ server-address [ service-port ] [ source { interface  interface-type interface-number | ip 

source-ip-address } ] ] 

User view 

3: Manage level 

server-address: IP address or host name of a remote FTP server. 

service-port: TCP port number of the remote FTP server, in the range 0 to 65535. The default value is 

21. 

interface interface-type interface-number: Specifies the source interface by its type and number. The 

primary IP address configured on this interface is the source address of the transmitted packets. If no 

primary IP address is configured on the source interface, the connection fails.  

ip source-ip-address: The source IP address of the current FTP client. This source address must be the 

one that has been configured on the device. 

Use the ftp command to log in to the remote FTP server and enter FTP client view. 

Note that: 

z 

This command applies to IPv4 networks. 

z 

If you use this command without specifying any parameters, you will simply enter the FTP client 

view without logging in to the FTP server.