3com S7906E Guide De Référence

Page de 2327
 
2-14 
If you specify the parameters, you will be prompted to enter the username and password for 
accessing the FTP server. 
The priority of the source address specified with this command is higher than that with the ftp 
client source command. If you specify the source address with the ftp client source command 
first and then with the ftp command, the source address specified with the ftp command is used to 
communicate with the FTP server. 
Related commands: ftp client source
Examples 
# Log in from the current device Sysname1 to the device Sysname2 with the IP address of 
192.168.0.211. The source IP address of the packets sent is 192.168.0.212. 
<Sysname> ftp 192.168.0.211 source ip 192.168.0.212 
Trying 192.168.0.211 ... 
Press CTRL+K to abort 
Connected to 192.168.0.211. 
220 FTP Server ready. 
User(192.168.0.211:(none)):abc 
331 Password required for abc 
Password: 
230 Login OK 
[ftp] 
ftp client source 
Syntax 
ftp client source { interface interface-type interface-number | ip source-ip-address } 
undo ftp client source 
View 
System view 
Default Level 
2: System level 
Parameters 
interface interface-type interface-number: Source interface for the FTP connection, including interface 
type and interface number. The primary IP address configured on the source interface is the source IP 
address of the packets sent by FTP. If no primary IP address is configured on the source interface, the 
connection fails.  
ip source-ip-address: Source IP address of the FTP connection. It must be an IP address that has been 
configured on the device. 
Description 
Use the ftp client source command to configure the source address of the transmitted FTP packets 
from the FTP client. 
Use the undo ftp client source command to restore the default.