3com S7906E Guide De Référence

 

1-9 

Use the display snmp-agent trap-list command to display the modules that can generate traps and 

whether their trap function is enabled or not. If a module comprises multiple sub-modules, then as long 

as one sub-module has the trap function enabled, the whole module will be displayed as being enabled 

with the trap function. 

Related commands: snmp-agent trap enable. 

# Display the modules that can generate traps and whether their trap function is enabled or not. 

<Sysname> display snmp-agent trap-list 

   bgp trap enable 

   configuration trap enable 

   flash trap enable 

   fr trap enable 

   isdn trap enable 

   mpls trap enable 

   ospf trap enable 

   standard trap enable 

   system trap enable 

   voice trap enable 

   vrrp trap enable 

 

   Enable traps: 11; Disable traps: 0 

In the above output, enable indicates that the module is allowed to generate traps whereas disable 

indicates the module is not allowed to generate traps. You can configure the trap function (enable or 

disable) of each module through command lines. 

display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ] * 

Any view 

1: Monitor level 

engineid  engineid: Displays SNMPv3 user information for a specified engine ID, where engineid 

indicates the SNMP engine ID. 

username  user-name: Displays SNMPv3 user information for a specified user name. It is case 

sensitive. 

group group-name: Displays SNMPv3 user information for a specified SNMP group name. It is case 

sensitive.