3com S7906E Guide De Référence

Page de 2327
 
1-20 
mac-vlan enable 
Syntax 
mac-vlan enable 
undo mac-vlan enable 
View 
Ethernet port view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the mac-vlan enable command to enable MAC address-based VLAN on a port.  
Use the undo mac-vlan enable command to disable MAC address-based VLAN on a port.  
By default, MAC address-based VLAN is disabled on a port.  
Examples 
# Enable MAC address-based VLAN on GigabitEthernet 2/0/1.  
<Sysname> system-view 
[Sysname] interface gigabitethernet 2/0/1 
[Sysname–GigabitEthernet2/0/1] mac-vlan enable 
mac-vlan mac-address 
Syntax 
mac-vlan mac-address mac-address [ mask mac-mask ] vlan vlan-id [ priority pri 
undo mac-vlan { all | mac-address mac-address [ mask mac-mask ] | vlan vlan-id } 
View 
System view 
Default Level 
2: System level 
Parameters 
mac-address mac-address: Specifies a MAC address.  
mask mac-mask: Specifies a mask for the MAC address in the format of H-H-H. The mac-mask 
argument is comprised of the high-order part (all the binary bits of which are 1s) and the low-order part 
(all the binary bits of which are 0s). By default, the hexadecimal digits of this argument are all Fs.  
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.