3com S7906E Guide De Référence

Page de 2327
 
1-21 
snmp-agent target-host 
Syntax 
snmp-agent target-host  trap  address  udp-domain { ip-address  |  ipv6  ipv6-address  } [ udp-port 
port-number ] [ vpn-instance vpn-instance-name params securityname security-string [ v1 | v2c | v3 
authentication | privacy ] ] 
undo  snmp-agent  target-host  {  ip-address | ipv6  ipv6-address  }  securityname  security-string 
vpn-instance vpn-instance-name ] 
View 
System view 
Default Level 
3: Manage level 
Parameters 
trap: Specifies the host to be the target host which will receive traps and notifications from the device. 
address: Specifies the destination IP address in the SNMP messages sent from the device. 
udp-domain: Indicates that the trap is transmitted using UDP. 
ip-address: The IPv4 address of the trap target host. 
ipv6 ipv6-address: Specifies the IPv6 address of the trap target host. 
udp-port port-number: Specifies the number of the port on the target host to receive traps. 
vpn-instance vpn-instance-name: Specifies the VPN where the target host resides, where 
vpn-instance-name indicates the VPN instance name and is a string of 1 to 31 characters. It is case 
sensitive and is applicable only in a network supporting IPv4. If you execute the command with this 
keyword and argument combination, you need to add the agent into this VPN domain, and ensure that 
the route between the agent and the NMS is available. 
params  securityname security-string: Specifies the authentication related parameter, which is an 
SNMPv1 or SNMPv2c community name or an SNMPv3 user name, a string of 1 to 32 characters. 
v1: SNMPv1. 
v2c: SNMPv2c. 
v3: SNMPv3. 
authentication: Specifies the security model to be authentication without privacy. Authentication is 
a process to check whether the packet is integral and whether it has been tampered. You need to 
configure the authentication password when creating an SNMPv3 user. 
privacy: Specifies the security model to be authentication with privacy. Privacy is to encrypt the 
data part of a packet to prevent it from being intercepted. You need to configure the authentication 
password and privacy password when creating an SNMPv3 user. 
Description 
Use the snmp-agent target-host command to configure the related settings for a trap target host. 
Use the undo  snmp-agent target-host command to remove the current settings. According to the 
networking requirements, you can use this command for multiple times to configure different settings for