3com S7906E Guide De Référence

 

1-18 

[Sysname] info-center monitor channel 0 

info-center snmp channel { channel-number | channel-name } 

System view 

2: System level 

channel-number: Specifies a channel number, in the range 0 to 9. 

channel-name: Specifies a channel name, which could be a default name or a self-defined name. The 

user needs to specify a channel name first before using it as a self-defined channel name. For more 

information, refer to the info-center channel name command. 

Use the info-center snmp channel command to configure the channel to output system information to 

the SNMP module. 

Use the undo info-center snmp channel command to restore the default channel to output system 

information to the SNMP module. 

By default, output of system information to the SNMP module is enabled with a default channel name of 

snmpagent and a default channel number of 5. 

For more information, refer to the display snmp-agent command in the SNMP Commands in the 

System Volume. 

# Set to output system information to the SNMP module through channel 6. 

<Sysname> system-view 

[Sysname] info-center snmp channel 6 

info-center source { module-name | default } channel { channel-number | channel-name } [ debug 

{ level severity | state state } * | log { level severity | state state } * | trap { level severity | state state } 

* ] * 

undo info-center source { module-name | default } channel { channel-number | channel-name } 

System view