3com S7906E Guide De Référence

Page de 2327
 
1-28 
To use 802.3 encapsulation, use the command: 
[Sysname-vlan3] protocol-vlan mode snap etype 0806 
IP Subnet-Based VLAN Configuration Commands 
display ip-subnet-vlan interface 
Syntax 
display ip-subnet-vlan interface { interface-type interface-number1 [ to  interface-type 
interface-number2 | all } 
View 
Any view 
Default Level 
2: System level 
Parameters 
interface-type interface-number1: Specifies a port by its type and number. 
interface-type interface-number1 to Interface-type interface-number2: Specifies multiple ports. 
all: Displays IP subnet-based VLAN information about all the ports with IP subnet-based VLAN 
configured. 
Description 
Use the display ip-subnet-vlan interface command to display IP subnet-based VLANs and IP subnet 
indexes on the specified port(s). 
Examples 
# Display IP subnet-based VLANs and IP subnet indexes on GigabitEthernet 2/0/1. 
<Sysname> system-view 
[Sysname]display ip-subnet-vlan interface gigabitethernet2/0/1 
Interface: GigabitEthernet2/0/1 
  VLAN ID   Subnet-Index    IP ADDRESS        NET MASK 
  ======================================================= 
     3           0             192.168.1.0    255.255.255.0 
Table 1-6 display ip-subnet-vlan interface command output description 
Field 
Description 
Interface 
Interface of which you want to view the 
information 
VLAN ID 
VLAN ID 
Subnet-Index Index 
of the IP subnet 
IP ADDRESS 
IP address of the subnet (either an IP address or 
a network address) 
NET MASK 
Mask of the IP subnet