3com S7906E Guide De Référence

 

1-26 

pse pse-id: Specifies a PSE ID.   

Use the poe legacy enable command to enable the PSE to detect nonstandard PDs. 

Use the undo poe legacy enable command to disable the PSE from detecting nonstandard PDs. 

By default, the PSE is disabled from detecting nonstandard PDs. 

# Enable PSE 7to detect nonstandard PDs. 

<Sysname> system-view 

[Sysname] poe legacy enable pse 7 

poe max-power max-power 

undo poe max-power 

PoE interface view, PoE-profile file view 

2: System level 

max-power: Maximum power in milliwatts allocated to a PoE interface. The range of this argument 

varies with devices. 

Use the poe max-power command to configure the maximum power for a PoE interface. 

Use the undo poe max-power command to restore the default. 

By default, the maximum power of the PoE interface is 15,400 milliwatts. 

# Set the maximum power of Ethernet 2/0/1 to 12,000 milliwatts. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] poe max-power 12000 

# Set the maximum power of Ethernet 2/0/1 to 12,000 milliwatts through a PoE configuration file. 

<Sysname> system-view 

[Sysname] poe-profile abc 

[Sysname-poe-profile-abc-1] poe max-power 12000 

[Sysname-poe-profile-abc-1] quit 

[Sysname] interface ethernet 2/0/1