3com S7906E Guide De Référence

 

1-15 

2: System level 

get: Obtains data from the HTTP server. 

post: Transfers data to the HTTP server. 

Use the operation command to configure the HTTP operation type. 

Use the undo operation command to restore the default. 

By default, the HTTP operation type is get. 

# Configure the HTTP operation type as post. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type http 

[Sysname-nqa-admin-test-http] operation post 

operation interface interface-type interface-number 

undo operation interface 

DHCP test type view 

2: System level 

interface-type interface-number: Type and number of the interface that is performing a DHCP test. 

Use the operation interface command to specify the interface to perform a DHCP test. 

Use the undo operation interface command to restore the default. 

By default, no interface is specified to perform a DHCP test. 

Note that the specified interface must be up; otherwise, the test will fail. 

# Specify the interface to perform a DHCP test as VLAN-interface 2. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type dhcp