3com S7906E Guide De Référence

 

1-20 

[Sysname-nqa-admin-test] type dhcp 

[Syaname-nqa-admin-test-dhcp] probe timeout 10000 

reaction  item-num  checked-element probe-fail threshold-type consecutive occurrences 

[ action-type { none | trigger-only } ] 

undo reaction item-num 

DHCP, DLSw, FTP, HTTP, ICMP-echo, SNMP, TCP, UDP-echo test type view 

2: System level 

item-num: Number of the reaction entry, in the range 1 to 10. 

checked-element: Type of the monitored element in collaboration. At present, the type of the 

monitored element can be probe failure only. 

probe-fail: The type of the monitored element is probe failure. 

threshold-type consecutive: Threshold type is consecutive probe failures. 

occurrences: Number of consecutive probe failures, in the range 1 to 16. 

action-type: Triggered action type, defaulting to none. 

none: No actions. 

trigger-only: Triggers collaboration between other modules only. 

Use the reaction command to establish a collaboration entry to monitor the probe results of the current 

test group. If the number of consecutive probe failures reaches the threshold, collaboration with other 

modules is triggered. 

Use the undo reaction command to remove the collaboration entry. 

By default, no collaboration entries are configured. 

Note that you cannot modify the content of a collaboration object using the reaction command after the 

collaboration object is created. 

Related commands: track in the Track Commands in the System Volume. 

# Create collaboration object 1. If the number of consecutive probe failures reaches 3, collaboration 

with other modules is triggered. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type tcp