3com S7906E Guide De Référence

 

1-8 

ntp-service broadcast-server [ authentication-keyid keyid | version number ] * 

undo ntp-service broadcast-server 

Interface view 

2: System level 

authentication-keyid keyid: Specifies the key ID to be used for sending broadcast messages to 

broadcast clients, where keyid is in the range of 1 to 4294967295. This parameter is not meaningful if 

authentication is not required.  

version number: Specifies the NTP version, where number is in the range of 1 to 3 and defaults to 3.  

Use the ntp-service broadcast-server command to configure the device to work in the NTP broadcast 

server mode.  

Use the undo ntp-service broadcast-server command to remove the configuration. 

# Configure the device to work in the broadcast server mode and send NTP broadcast messages on 

VLAN-interface 1, using key 4 for encryption, and set the NTP version to 3.  

<Sysname> system-view 

[Sysname] interface vlan-interface 1 

[Sysname-Vlan-interface1] ntp-service broadcast-server authentication-keyid 4 version 3 

undo ntp-service in-interface disable 

Interface view 

2: System level 

None