3com S7906E Guide De Référence

 

1-3 

Track IF 

The interface to be tracked. It is displayed only after the 
execution of the vrrp vrid track interface command. 

Track Object 

The object to be tracked. It is displayed only after the execution 
of the vrrp vrid track command. 

Pri Reduced 

The priority value that is reduced when the monitored interface 
is down or when the status of the monitored Track object turns 
to negative.  
It is displayed only after the execution of the vrrp vrid track 
interface command or the vrrp vrid track command. 

Switchover 

Switchover mode. If the status of the monitored Track object 
turns to negative, the backup will switch to the master 
immediately. 

Virtual IP 

Virtual IP addresses of the VRRP group 

Virtual MAC 

Virtual MAC address corresponding to the virtual IP address of 
the VRRP group. It is displayed only when the switch is in the 
state of master. 

Master IP 

Primary IP address of the interface which belongs to the switch 
in the state of master 

 

display vrrp statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ] 

Any view 

1: Monitor level 

interface  interface-type interface-number: Displays VRRP statistics of the specified interface. 

interface-type interface-number specifies an interface by its type and number. 

vrid virtual-router-id: Displays statistics of the specified VRRP group. virtual-router-id specifies a VRRP 

group by its group number, in the range 1 to 255. 

Use the display vrrp statistics command to display statistics about VRRP. 

If you specify both an interface and a VRRP group, only the statistics about the specified VRRP group 

are displayed; if you only specify an interface, the statistics about all the VRRP groups on the interface 

are displayed; if you specify neither, the statistics about all the VRRP groups on the device are 

displayed.  

# Display the statistics about all VRRP groups.