Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-20 
vrrp ipv6 ping-enable 
Syntax 
vrrp ipv6 ping-enable 
undo vrrp ipv6 ping-enable 
View 
System view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the vrrp ipv6 ping-enable command to configure a VRRP group to respond to the ping packets 
destined for its virtual IPv6 address. 
Use the undo vrrp ipv6 ping-enable command to disable a VRRP group from responding to the ping 
packets destined for its virtual IPv6 address. 
By default, a VRRP group responds to the ping packets destined for its virtual IPv6 address. 
Perform this configuration before configuring a VRRP group. 
Examples 
# Configure a VRRP group to respond to the ping packets destined for its virtual IPv6 address. 
<Sysname> system-view 
[Sysname] vrrp ipv6 ping-enable 
vrrp ipv6 vrid preempt-mode 
Syntax 
vrrp ipv6 vrid virtual-router-id preempt-mode [ timer delay delay-value ] 
undo vrrp ipv6 vrid virtual-router-id preempt-mode [ timer delay ] 
View 
Interface view 
Default Level 
2: System level 
Parameters 
virtual-router-id: Virtual router ID or VRRP group number, in the range 1 to 255. 
timer delay delay-value: Sets preemption delay. The delay-value argument is in the range of 0 to 255 
seconds and defaults to 0 seconds.