3com S7906E Guide De Référence
1-1
1
HA Configuration Commands
HA Configuration Commands
display switchover state
Syntax
display switchover state [ slot-id ]
View
Any view
Default Level
1: Monitor level
Parameters
slot-id: Slot ID of the active main board (AMB) or standby main board (SMB).
Description
Use the display switchover state command to display the switchover state.
This command displays the switchover state on the AMB or the SMB depending on the slot number
specified. The switchover state of the AMB will be displayed if no slot number is specified.
Examples
# Display the switchover state on the AMB.
<Sysname> display switchover state
HA FSM State(master): Slave is absent.
Table 1-1 display switchover state command output description
Field
Description
Slave is absent
The SMB is not in the slot.
Waiting batch backup request from slave
Waiting for the backup requests from the SMB
Batch backup
Backup state
Realtime and routine backup to slave
Real-time or routine backup state
slave restart
Syntax
slave restart