3com S7906E Guide De Référence

Page de 2327
 
1-4 
Description 
Use the patch delete command to delete the specified patch and all the patches before the specified 
patch number.  
This command only removes the patches from the memory patch area, and it does not delete them from 
the storage medium. The patches are in the IDLE state after execution of this command.  
If you execute this command without specifying slave or slot-number, the command deletes the 
specified patch(es) on the active main board. 
Examples 
# Delete patch 3 and all the patches before patch 3 on board 5. 
<Sysname> system-view 
[Sysname] patch delete 3 slot 5 
patch load 
Syntax 
patch load [ slave | slot slot-number 
View 
System view 
Default Level 
3: Manage level 
Parameters 
slave: Specifies the standby main board.  
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the 
device model. 
Description 
Use the patch load command to load the patch file on the Flash to the memory patch area of the 
system.  
The patch files of the main board, interface board, and L3+ board are patchmain,  patchio, and 
patchl3plus respectively.  
The active main board and the standby main board load their patch files from their own Flash. The 
administrator needs to ensure the consistency of the patch files on the active and standby main boards.  
If you execute this command without specifying slave or slot-number, the command loads the patch file 
to the active main board. 
Examples 
# Load the patch file for board 3. 
<Sysname> system-view 
[Sysname] patch load slot 3