3com S7906E Guide De Référence
1-4
qinq ethernet-type customer-tag
Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
View
System view
Default Level
2: System level
Parameters
hex-value: Hexadecimal protocol type ID, in the range of 0x0001 to 0xFFFF, but you cannot set it to any
of the protocol type values listed in
.
Table 1-1 Common protocol type values
Protocol type
Value
ARP 0x0806
PUP 0x0200
RARP 0x8035
IP 0x0800
IPv6 0x86DD
PPPoE 0x8863/0x8864
MPLS 0x8847/0x8848
IPX/SPX 0x8137
IS-IS 0x8000
LACP 0x8809
802.1x 0x888E
Cluster 0x88A7
Reserved 0xFFFD/0xFFFE/0xFFFF
Description
Use the qinq ethernet-type customer-tag command to configure the TPID value of the customer
network VLAN tags.
Use the undo qinq ethernet-type customer-tag command to restore the system default.
By default, the TPID value of the customer network VLAN tags is 0x8100.
Examples
# Set the TPID value of the customer network VLAN tags to 0x9100.
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 9100