3com S7906E Guide De Référence

 

1-5 

qinq ethernet-type service-tag hex-value 

undo qinq ethernet-type service-tag 

Ethernet port view, Layer-2 aggregate interface view, port group view 

2: System level 

hex-value: Hexadecimal protocol type ID, in the range of 0x0001 to 0xFFFF except the protocol type 

values listed in 

Use the qinq ethernet-type service-tag command to configure the TPID value of the service provider 

network VLAN tags.  

Use the undo qinq ethernet-type service-tag command to restore the default.  

By default, the TPID value of the service provider network VLAN tags is 0x8100.  

# Set the TPID value of the service provider network VLAN tags to 0x9100 for GigabitEthernet 2/0/1.  

<Sysname> system-view 

[Sysname] interface GigabitEthernet2/0/1 

[Sysname-GigabitEthernet2/0/1] qinq ethernet-type service-tag 9100 

qos apply policy policy-name inbound  

undo qos apply policy inbound  

Ethernet port view, port group view 

2: System level 

inbound: Applies the specified policy to the traffic received on the current port(s).  

policy-name: Policy name, a string of 1 to 31 characters. 

Use the qos apply policy command to apply a policy on a port or a port group.