3com S7906E Guide De Référence
1-4
Linktrace to MEP 2001 with the sequence number 1101-43361 :
MAC Address TTL Forwarded Relay Action
0010-FC00-6512 63 No None
Table 1-2 cfd linktrace command output description
Field
Description
Linktrace to MEP mep-id with the sequence
number sequence-number
number sequence-number
Linktrace to MEP mep-id with the sequence
number sequence-number
number sequence-number
MAC Address
Source MAC address in the LTR messages
TTL
Hop count when the LTM passes the device
Forwarded
z
Yes means that the current device forwards
LTMs.
LTMs.
z
No means that the current device does not
forward LTMs.
forward LTMs.
Relay Action
z
Found: Indicates that the forwarding device
found the destination MAC address in its
MAC address table.
found the destination MAC address in its
MAC address table.
z
Unknown: Indicates that the forwarding
device failed to find the destination MAC
address in its MAC address table.
device failed to find the destination MAC
address in its MAC address table.
z
None: Indicates that it is a MEP that
responded to the LTM message. A MEP does
not need to find the destination MAC address.
responded to the LTM message. A MEP does
not need to find the destination MAC address.
cfd linktrace auto-detection
Syntax
cfd linktrace auto-detection [ size size-value ]
undo cfd linktrace auto-detection
View
System view
Default level
2: System level
Parameters
size size-value: Specifies the size of the buffer used to store the auto-detection result, ranging from 1 to
100 (in terms of sending times).
This value defaults to 5, which means the buffer stores the results of the recent five auto-detections.
Description
Use the cfd linktrace auto-detection command to enable the auto sending of linktrace messages.
Use the undo cfd linktrace auto-detection command to disable this function.
By default, this function is disabled.
Note that: