3com S7906E Guide De Référence
1-14
Table 1-6 display cfd linktrace-reply auto-detection command output description
Field
Description
Service instance
Service instance to which the MEPs that sent LTM messages belong
MEP ID
ID of the MEP that sends LTMs
Time
Time of the LTMs automatically sent
Target MEP ID
ID of the target MEP
TTL
Initial hop count of the automatically sent LTMs
MAC Address
Source MAC address in the LTR messages
TTL
Hop count when LTM passes the device
Forwarded
z
Yes means that the device has forwarded the LTMs.
z
No means that the device did not forward the LTMs.
Relay Action
z
Found: Indicates that the forwarding device found the destination MAC
address in its MAC address table.
address in its MAC address table.
z
Unknown: Indicates that the forwarding device failed to find the
destination MAC address in its MAC address table.
destination MAC address in its MAC address table.
z
None: Indicates that it is a MEP that responded to the LTM message. A
MEP does not need to find the destination MAC address.
MEP does not need to find the destination MAC address.
display cfd ma
Syntax
display cfd ma [ [ ma-name ] md md-name ]
View
Any view
Default level
2: System level
Parameters
ma-name: Name of MA, ranging from 1 to 48 characters, composed of letters, numbers or underlines,
but cannot start with an underline character.
md md-name: Specifies the name of an MD, ranging from 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
Description
Use the display cfd ma command to display the configuration of a specified MA.
Note that:
z
If MD is not specified, this command will display the MA configurations of all MDs on the device.
z
If both MD and MA are specified, this command will display the specified MA configuration.
z
If only MD is specified, this command will display the configurations of all MAs in that MD.
Examples
# Display the MA configuration information.