3com S7906E Guide De Référence

Page de 2327
 
1-20 
Examples 
# Configure the key update time and encryption reply timeout time for the EPON card in slot 3 as 20 
seconds and 5 seconds (50 × 100 ms) respectively.  
<Sysname> system-view 
[Sysname] ftth 
[Sysname-ftth] encryption timer update-time 20 no-reply-timeout 50 slot 3 
epon-parameter ouilist 
Syntax 
epon-parameter ouilist { oui oui-value oam-version version-value } &<1-9> slot slot-number 
undo epon-parameter ouilist slot slot-number 
View 
FTTH view 
Default Level 
2: System level 
Parameters 
oui-value: OUI (Organizationally Unique Identifier) of the ONU.  
version-value: OAM (Operation, Administration and Maintenance) version number of the ONU.  
&<1-9>: Indicates that you can specify up to 9 OUI values/OAM version numbers.  
slot-number: Slot number of the EPON card.  
Description 
Use the epon-parameter ouilist command to configure the OUI and extended OAM version number of 
the ONU in the specified slot.  
Use the undo epon-parameter ouilist command to cancel the configuration.  
By default, the OUI and extended OAM version number are 111111 and 1 respectively. After this 
configuration, an H3C ONU attached to an OLT goes online after being bound with the specified ONU 
port (The OUI and extended OAM version number for an H3C ONU are 111111 and 1 respectively). 
Note the following: 
 
Entries with the same OUIs and extended OAM version numbers cannot be not configured at the 
same time on one EPON card. 
 
When the OUI and extended OAM version number list of an EPON card changes (when a list is 
configured or canceled), all the ONUs under the EPON card will reregister.  
Related commands: display epon-parameter
Examples 
# Configure the OUI and extended OAM version number of the ONU connected to the EPON card in 
slot 3.  
<Sysname> system-view 
[Sysname] ftth