3com S7906E Guide De Référence

 

2-20 

  critical       <=CRIT level messages to OLT      (severity=2) 

  debugging      <=DEBUG level messages to OLT     (severity=7) 

  emergencies    <=EMERG Level Switch to OLT       (severity=0) 

  errors         <=ERR level messages to OLT       (severity=3) 

  information    <=INFO level messages to OLT      (severity=6) 

  notifications  <=NOTICE level messages to OLT    (severity=5) 

  warnings       <=WARN level messages to OLT      (severity=4) 

[Sysname-Onu3/0/1:1] onu-event log enable level errors 

# Disable the OLT attached to ONU 3/0/3:1 from reporting log information to the ONU.  

<Sysname> system-view 

[Sysname] interface onu 3/0/3:1 

[Sysname-Onu3/0/3:1] undo onu-event log enable 

Table 2-6 onu-event log enable level command output description 

emergencies 

0 

Indicating that the system is unavailable. 

alerts 

1 

Errors that need to be corrected immediately.  

critical 

2 

Critical Information.  

errors 3 

Errors. 

warnings 

4 

Warning Information.  

notifications 

5 

Normal information that needs to be noticed.  

information 

6 

Normal prompt information that needs to be recorded.  

debugging 

7 

Debugging information.  

 

ONU port view 

None 

Use the onu port-isolate enable command to isolate all UNI ports of the ONU.  

Use the undo onu port-isolate enable command to disable UNI port isolation.  

By default, UNI port isolation is disabled.  

# Isolate all UNI ports attached to the ONU corresponding to ONU 3/0/1:1.