3com S7906E Guide De Référence

Page de 2327
 
2-23 
 
The router port here refers to the port connecting the ONU to the router. The ONU receives IGMP 
general query messages from the router through this port. The aging time of the router port should 
be a value about 2.5 times of the general query interval. 
 
This command takes effect on H3C ONUs only.  
Examples 
# Enable IGMP join suppression on the ONU.  
<Sysname> system-view 
[Sysname] interface onu 3/0/1:1 
[Sysname-Onu3/0/1:1] onu-protocol igmp-snooping report-aggregation enable 
port access vlan 
Syntax 
port access vlan vlan-id 
undo port access vlan 
View 
ONU port view 
Default Level 
2: System level 
Parameters 
vlan-id: VLAN ID, in the range of 1 to 4,094 
Description 
Use the port access vlan command to add the current Access port to the specified VLAN.  
Use the undo port access vlan command to add the current Access port to the default VLAN. 
By default, all Access ports are added to VLAN 1. 
Ensure the VLAN specified by the vlan-id argument exists before issuing the above commands. 
Examples 
# Add port ONU3/0/1:1 to VLAN 3. 
<Sysname> system-view 
[Sysname] vlan 3 
[Sysname-vlan3] quit 
[Sysname] interface onu 3/0/1:1 
[Sysname-Onu3/0/1:1] port access vlan 3 
port link-type 
Syntax 
port link-type { access | trunk } 
undo port link-type