3com S7906E Guide De Référence

 

2-31 

ONU port view 

2: System level 

uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of 

UNIs can be up to 80.  

across: Specifies the cable type to be crossover.  

auto: Specifies to auto-sense the cable type.  

normal: Specifies the cable type to be straight-through. 

Use the uni mdi command to set the MDI mode for UNIs.  

Use the undo uni uni-number mdi command to restore the MDI mode for UNIs to the default value.  

By default, the MDI mode for UNIs is auto, that is, the UNIs of the ONU can recognize the cable type 

automatically.  

 

This command takes effect on H3C ONUs only.  

 

# Set the MDI mode of UNI 1 to auto.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] uni 1 mdi auto 

uni uni-number multicast vlan { vlan-id } & <1-50> 

undo uni-number multicast vlan { { vlan-id } & <1-50> | all } 

ONU port view 

2: System level