3com S7906E Guide De Référence

 

3-4 

When the total number of error frames and error frame rate of the data transferred between the OLT and 

ONU exceed the alarm thresholds, the frame error rate alarm occurs.  

By default, both uplink and downlink data between OLT and ONU are monitored. 

Related commands: alarm frame-error-rate enable.  

# Enable the frame error rate alarm on OLT 1/0/1, adopt the default monitor direction, and set the 

corresponding alarm threshold to 20.  

<Sysname> system-view 

[Sysname] interface olt 1/0/1 

[Sysname-Olt1/0/1] alarm frame-error-rate direction up-down-link threshold 20 

OLT port view, FTTH view 

2: System level 

None 

Use the alarm frame-error-rate enable command to enable the frame error rate alarm. 

Use the undo alarm frame-error-rate enable command to disable the frame error rate alarm. 

By default, the frame error rate alarm is enabled.  

# Enable the frame error rate alarm on OLT 3/0/1. 

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] alarm frame-error-rate enable 

OLT port view, FTTH view