3com S7906E Guide De Référence

 

3-5 

2: System level 

None

 

Use the alarm llid-mismatch enable command to enable the LLID mismatch frame alarm. 

Use the undo alarm llid-mismatch enable command to disable the LLID mismatch frame alarm. 

By default, the LLID mismatch frame alarm is disabled.  

# Enable the LLID mismatch frame alarm on OLT 3/0/1.  

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] alarm llid-mismatch enable 

alarm llid-mismatch threshold threshold 

OLT port view, FTTH view 

2: System level 

threshold threshold: Specifies the alarm threshold of the LLID mismatch frame alarm. It ranges from 

1000 to 10

9

 frames and defaults to 5000 frames. 

 

Use the alarm llid-mismatch threshold command to configure the alarm threshold of LLID mismatch 

frame. 

Use the undo alarm llid-mismatch threshold command to restore the default alarm threshold. 

The system generates an LLID mismatch frame alarm when the timeslots are used in disorder, that is, 

one ONU uses another ONU's timeslot to forward data.  

Related commands: alarm llid-mismatch enable.  

# Set the alarm threshold of LLID mismatch frame to 6000 frames.  

<Sysname> system-view 

[Sysname] interface olt 1/0/1