3com S7906E Guide De Référence

 

3-15 

The commands here take effect only for OAM 2.0 and above.  

 

# Enable the error frame seconds summary alarm for the ONU corresponding to ONU 3/0/1:1.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] alarm oam error-frame-seconds-summary enable 

OLT port view, FTTH view 

2: System level 

None

 

Use the alarm oam local-link-fault enable command to enable the local link fault alarm. 

Use the undo alarm oam local-link-fault enable command to disable the local link fault alarm. 

By default, the local ink fault alarm is enabled.  

The system generates a local link fault alarm when the receiving direction of the local data terminal is in 

trouble. 

# Enable the local link fault alarm on OLT 3/0/1.  

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] alarm oam local-link-fault enable