Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
3-17 
[Sysname] interface olt 3/0/1 
[Sysname-Olt3/0/1] alarm onu-over-limitation enable 
alarm port bit-error-rate enable 
Syntax 
alarm port bit-error-rate enable 
undo alarm port bit-error-rate enable 
View 
ONU port view, OLT port view, FTTH view 
Default Level 
2: System level 
Parameters 
None
 
Description 
Use the alarm port bit-error-rate enable command to enable the port bit error rate alarm.  
Use the undo alarm port bit-error-rate enable command to disable the port bit error rate alarm.  
When both the total number of error bits and bit error rate of the data transferred between the OLT and 
ONU exceed the alarm thresholds, the port bit error rate alarm occurs.  
The threshold setting of the port bit error rate alarm is the same as that of the bit error rate alarm.  
Related commands: alarm bit-error-rate. 
By default, the port bit error rate alarm is enabled.  
Examples 
# Enable the port bit error rate alarm on OLT 3/0/1.  
<Sysname> system-view 
[Sysname] interface olt3/0/1 
[Sysname-Olt3/0/1] alarm port bit-error-rate enable 
alarm registration-error enable 
Syntax 
alarm registration-error enable 
undo alarm registration-error enable 
View 
OLT port view, FTTH view 
Default Level 
2: System level