3com S7906E Guide De Référence

 

3-19 

# Enable the remote stable alarm on OLT 3/0/1.  

<Sysname> system-view 

[Sysname] interface olt 3/0/1 

[Sysname-Olt3/0/1] alarm remote-stable enable 

FTTH view 

2: System level 

None 

Use the alarm software-error enable command to enable the software error alarm of the system. 

Use the undo alarm software-error enable command to disable the software error alarm of the 

system. 

The system generates a software error alarm when a signal error, DA abnormity (that is, data access 

abnormity) error, or memory allocation failure occurs. 

By default, the software error alarm is enabled. 

# Enable the software error alarm in the EPON system.  

<Sysname> system-view 

[Sysname] ftth 

[Sysname-ftth] alarm software-error enable 

monitor enable 

undo monitor enable 

FTTH view