3com S7906E Guide De Référence

 

1-7 

Link-Down 

Link-Down packet statistics received/sent on the port 

Common Flush FDB 

Common-Flush-FDB packet statistics received/sent on the port 

Complete  Flush FDB 

Complete-Flush-FDB packet statistics received/sent on the port 

Edge Hello 

Edge-Hello packet statistics received/sent on the port 

Major Fault 

Major-Fault packet statistics received/sent on the port 

Packet Total 

Total number of packets received/sent on the port. Here only Hello, 
Link-Down, Common-Flush-FDB, Complete-Flush-FDB, Edge-Hello, 
and Major-Fault packets of RRPP are counted.  

 

display rrpp verbose domain domain-id [ ring ring-id ] 

Any view 

1: Monitor level 

domain-id: RRPP domain ID, in the range 1 to 8. 

ring-id: RRPP ring ID, in the range 1 to 64. 

Use the display rrpp verbose command to display detailed information about RRPP configuraiton. 

If you have specified an RRPP ring ID in the command, the detailed information of the specified ring in 

the specified RRPP domain appears. Otherwise, the detailed information of all the rings in the specified 

RRPP domain appears. 

# Display the detailed information of ring 1 in RRPP domain 1.  

<Sysname> display rrpp verbose domain 1 ring 1 

Domain ID     : 1 

Control VLAN  : Major 5    Sub 6 

Protected VLAN: Reference Instance 0 to 2, 4 

Hello Timer   : 1  sec  Fail Timer : 3  sec 

Ring ID       : 1 

Ring Level    : 1 

Node Mode     : Master 

Ring State    : Complete 

Enable Status : Yes    Active Status: Yes 

Primary port  : GigabitEthernet3/0/1    Port status: UP