3com S7906E Guide De Référence

 

1-6 

z 

Do not use the destination mirroring port for any purpose other than port mirroring. 

# Configure Ethernet 2/0/1 as the destination port of port mirroring group 1 (a remote destination port 

mirroring group). 

<Sysname> system-view 

[Sysname] mirroring-group 1 remote-destination 

[Sysname] mirroring-group 1 monitor-port Ethernet 2/0/1 

mirroring-group group-id remote-probe vlan rprobe-vlan-id  

undo mirroring-group group-id remote-probe vlan rprobe-vlan-id 

System view 

2: System level 

group-id: Port mirroring group number, in the range of 1 to 4. 

rprobe-vlan-id: ID of the VLAN to be configured as the remote mirroring VLAN. Note that the VLAN must 

be an existing static VLAN.  

Use the mirroring-group remote-probe vlan command to specify a VLAN as the mirroring VLAN for a 

remote source port mirroring group or a remote destination port mirroring group.  

Use the undo mirroring-group remote-probe vlan command to remove the remote mirroring VLAN 

from a remote source mirroring group or a remote destination mirroring group. 

Note that: 

z 

Only remote source port mirroring groups or remote destination port mirroring groups can have 

remote mirroring VLANs. A port mirroring group can have only one remote mirroring VLAN. 

z 

To remove a VLAN operating as a remote port mirroring VLAN, you need to restore it to a normal 

VLAN first. A remote port mirroring group gets invalid if the corresponding remote port mirroring 

VLAN is removed. 

z 

You are recommended to use a remote mirroring VLAN for remote mirroring only. 

# Specify VLAN 2 as the remote mirroring VLAN of port mirroring group 1 (assuming that VLAN 2 

already exists). 

<Sysname> system-view 

[Sysname] mirroring-group 1 remote-source 

[Sysname] mirroring-group 1 remote-probe vlan 2