3com S7906E Guide De Référence

 

2-5 

<Sysname> system-view 

[Sysname] interface vlan-interface 1 

[Sysname-Vlan-interface1] dhcp relay information enable 

[Sysname-Vlan-interface1] dhcp relay information strategy replace 

[Sysname-Vlan-interface1] dhcp relay information format verbose 

dhcp relay information remote-id format-type { ascii | hex } 

Interface view 

2: System view 

ascii: Specifies the code type for the remote ID sub-option as ascii. 

hex: Specifies the code type for the remote ID sub-option as hex. 

Use the dhcp relay information remote-id format-type command to configure the code type for the 

non-user-defined remote ID sub-option. 

Use the undo dhcp relay information remote-id format-type command to restore the default. 

By default, the code type for the remote ID sub-option is HEX. 

Note that: 

This command applies to configuring the non-user-defined remote ID sub-option only. After you 

configure the padding content for the remote ID sub-option using the dhcp relay information 

remote-id string command, ASCII is adopted as the code type. 

# Configure the code type for the non-user-defined remote ID sub-option as ascii. 

<Sysname> system-view 

[Sysname] interface vlan-interface 1 

[Sysname-Vlan-interface1] dhcp relay information remote-id format-type ascii 

dhcp relay information remote-id string { remote-id | sysname } 

Interface view