3com S7906E Guide De Référence

 

2-10 

dhcp relay server-group group-id ip ip-address 

undo dhcp relay server-group group-id [ ip ip-address ] 

System view 

2: System level 

group-id: DHCP server group number, in the range of 0 to 19. 

ip ip-address: DHCP server IP address. 

Use the dhcp relay server-group command to specify a DHCP server for a DHCP server group. 

Use the undo dhcp relay server-group command to remove a DHCP server from a DHCP server 

group, if no ip ip-address is specified, all servers in the DHCP server group and the server group itself 

will be removed. 

By default, no DHCP server is specified for a DHCP server group. 

Note that: 

z 

The IP address of any DHCP server and any interface’s IP address of the DHCP relay agent 

cannot be in the same network segment. Otherwise, the client may fail to obtain an IP address. 

z 

If a server group has been correlated to multiple interfaces, you need to cancel these correlations 

before removing the server group. 

Related commands: display dhcp relay server-group. 

# Specify DHCP server 1.1.1.1 for DHCP server group 1 on the relay agent. 

<Sysname> system-view 

[Sysname] dhcp relay server-group 1 ip 1.1.1.1 

dhcp relay server-select group-id 

Interface view 

2: System level