3com S7906E Guide De Référence

 

2-16 

all: Displays the information of all DHCP server groups. 

Use the display dhcp relay server-group command to display the configuration information of a 

specified or all DHCP server groups. 

# Display IP addresses of DHCP servers in DHCP server group 1. 

<Sysname> display dhcp relay server-group 1 

    No.            Group IP 

    1              1.1.1.1 

    2              1.1.1.2 

Table 2-4 display dhcp relay server-group command output description 

No. Sequence 

number 

Group IP 

IP address in the server group 

 

display dhcp relay statistics [ server-group { group-id | all } ] 

Any view 

1: Monitor level 

group-id: Specifies a server group number in the range of 0 to 19 about which to display DHCP packet 

statistics. 

all: Specifies all server groups about which to display DHCP packet statistics. Information for each 

group will be displayed. 

Use the display dhcp relay  statistics command to display DHCP packet statistics related to a 

specified or all DHCP server groups. 

Note that if no parameter (server-group and all) is specified, all DHCP packet statistics on the relay 

agent will be displayed. 

# Display all DHCP packet statistics on the relay agent. 

<Sysname> display dhcp relay statistics 

     Bad packets received:                    0