Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-7 
Parameters 
None 
Description 
Use the dns resolve command to enable dynamic domain name resolution. 
Use the undo dns resolve command to disable dynamic domain name resolution. 
Dynamic domain name resolution is disabled by default. 
Examples 
# Enable dynamic domain name resolution. 
<Sysname> system-view 
[Sysname] dns resolve 
dns server 
Syntax 
dns server ip-address 
undo dns server [ ip-address ] 
View 
System view 
Default Level 
2: System level 
Parameters 
ip-address: IP address of the DNS server. 
Description 
Use the dns server command to specify a DNS server. 
Use the undo dns server to remove DNS server(s). 
No DNS server is specified by default. 
You can configure a maximum of six DNS servers, including those with IPv6 addresses. 
Related commands: display dns server. 
Examples 
# Specify the DNS server 172.16.1.1. 
<Sysname> system-view 
[Sysname] dns server 172.16.1.1 
ip host 
Syntax 
ip host hostname ip-address 
undo ip host hostname [ ip-address ]