3com S7906E Guide De Référence

 

1-5 

Flags 

Flag indicating the type of mapping between a host name and an IPv6 
address. Static indicates a static mapping. 

IPv6Address 

IPv6 address of a host 

 

display ipv6 interface [ interface-type [ interface-number ] ] [ verbose ] 

Any view 

1: Monitor level 

interface-type: Interface type. 

interface-number: Interface number. 

verbose: Displays the detailed IPv6 information of an interface. 

Use the display ipv6 interface command to display the IPv6 information of an interface for which an 

IPv6 address can be configured. 

If interface-type interface-number is not specified, the IPv6 information of all interfaces for which IPv6 

addresses can be configured is displayed; if only interface-type is specified, the IPv6 information of the 

interfaces of the specified type for which IPv6 addresses can be configured is displayed; if 

interface-type interface-number is specified, the IPv6 information of the specified interface is displayed. 

If the verbose keyword is also specified, the detailed IPv6 information of the interface is displayed. 

# Display the IPv6 information of VLAN-interface 2. 

<Sysname> display ipv6 interface vlan-interface 2 verbose 

Vlan-interface2 current state :UP 

Line protocol current state :UP 

IPv6 is enabled, link-local address is FE80::1234:56FF:FE65:4322 

  Global unicast address(es): 

    2001::1, subnet is 2001::/64 

  Joined group address(es): 

    FF02::1:FF00:1 

    FF02::1:FF65:4322 

    FF02::2 

    FF02::1 

  MTU is 1500 bytes 

  ND DAD is enabled, number of DAD attempts: 1