3com S7906E Guide De Référence
1-8
Field
Description
OutDiscards
Sent packets that were discarded due to resource problems
rather than packet content errors
rather than packet content errors
# Display the brief IPv6 information of all interfaces for which IPv6 addresses can be configured.
<Sysname> display ipv6 interface
*down: administratively down
(s): spoofing
Interface
Physical
Protocol
IPv6 Address
Vlan-interface1 down
down
Unassigned
Vlan-interface2 up
up
2001::1
Vlan-interface100
up
down
Unassigned
Table 1-6 display ipv6 interface command output description
Field
Description
*down:
administrative
ly down
administrative
ly down
The interface is down, that is, the interface is closed by using the shutdown
command.
command.
(s): spoofing
Spoofing attribute of the interface, that is, the link protocol state of the interface is
up, but the link does not exist, or the link is established on demand, instead of being
permanent.
up, but the link does not exist, or the link is established on demand, instead of being
permanent.
Interface
Name of the interface
Physical
Physical state of the interface:
z
*down: Indicates that the VLAN interface is administratively down; that is, the
interface is shut down using the shutdown command.
interface is shut down using the shutdown command.
z
down: Indicates that the VLAN interface is administratively up but its physical
state is down; that is, no port in the VLAN is up, which may be caused by a
connection or link failure.
state is down; that is, no port in the VLAN is up, which may be caused by a
connection or link failure.
up: Indicates that the administrative and physical states of the VLAN interface are
both up.
both up.
Protocol
Link layer protocol state of the interface:
z
down: Indicates that the network layer protocol state of the VLAN interface is
down, generally because no IP address is configured.
down, generally because no IP address is configured.
z
up: Indicates that the network layer protocol state of the VLAN interface is up.
IPv6 Address
IPv6 address of the interface. Only the first of configured IPv6 addresses is
displayed. (If no address is configured for the interface, “Unassigned” will be
displayed.)
displayed. (If no address is configured for the interface, “Unassigned” will be
displayed.)
display ipv6 neighbors
Syntax
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ | { begin | exclude | include } regular-expression ]
View
Any view