3com S7906E Guide De Référence

Page de 2327
 
1-26 
Description 
Use the ipv6 icmp-error command to configure the size and update period of the token bucket. 
Use the undo ipv6 icmp-error command to restore the defaults. 
By default, the size is 10 and the update period is 100 milliseconds. That is, at most 10 ICMPv6 error 
packets can be sent within 100 milliseconds. 
Examples 
# Set the capacity of the token bucket to 50 and the update period to 100 milliseconds. 
<Sysname> system-view 
[Sysname] ipv6 icmp-error bucket 50 ratelimit 100 
ipv6 icmpv6 multicast-echo-reply enable 
Syntax 
ipv6 icmpv6 multicast-echo-reply enable 
undo ipv6 icmpv6 multicast-echo-reply 
View 
System view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the ipv6 icmpv6 multicast-echo-reply enable command to enable the sending of multicast echo 
replies.  
Use the undo ipv6 icmpv6 multicast-echo-reply command to disable the sending of multicast echo 
replies. 
By default, the device is disabled from sending multicast echo replies. 
Examples 
# Enable the sending of multicast echo replies. 
<Sysname> system-view 
[Sysname] ipv6 icmpv6 multicast-echo-reply enable 
ipv6 nd autoconfig managed-address-flag 
Syntax 
ipv6 nd autoconfig managed-address-flag 
undo ipv6 nd autoconfig managed-address-flag