3com S7906E Guide De Référence

 

1-4 

inbound: Samples inbound packets. 

outbound: Samples outbound packets. 

Use the sflow enable command to enable sFlow in the inbound or outbound direction on the port. 

Use the undo sflow enable command to disable sFlow in the inbound or outbound direction on the 

port. 

sFlow is disabled by default. 

If you want to enable sFlow on an aggregation group, you need to enable sFlow on each member port. 

# Enable sFlow in the outbound direction on GigabitEthernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] sflow enable outbound 

sflow interval interval-time 

undo sflow interval 

System view 

2: System level 

interval-time: Counter sampling interval in seconds, in the range 2 to 200. 

Use the sflow interval command to configure the counter sampling interval. 

Use the undo sflow interval command to restore the default interval. 

By default, the sampling interval is 20 seconds. 

# Configure the counter sampling interval as 50 seconds. 

<Sysname> system-view 

[Sysname] sflow interval 50