3com S7906E Guide De Référence
1-19
display ipv6 routing-table protocol
Syntax
display ipv6 routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol: Displays routes of a routing protocol, which can be bgp4+, direct, isisv6, ospfv3, ripng and
static.
inactive: Displays only inactive routes. Without the keyword, all active and inactive routes are
displayed.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
Description
Use the display ipv6 routing-table protocol command to display routes of a specified routing
protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Direct Routing Table's Status : < Inactive >
Summary Count : 0
Refer to
for description about the above output.
display ipv6 routing-table statistics
Syntax
display ipv6 routing-table statistics
View
Any view