3com S7906E Guide De Référence
1-10
z
If protocol is specified, RIP filters only the outgoing routes redistributed from the specified routing
protocol. Otherwise, RIP filters all routes to be advertised.
z
If interface-type interface-number is specified, RIP filters only the routes advertised by the specified
interface. Otherwise, RIP filters routes advertised by all RIP interfaces.
Related commands: acl, import-route, and ip ip-prefix.
Examples
# Reference ACL 2000 to filter outbound routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] filter-policy 2000 export
# Reference IP prefix list abc to filter outbound routes on Vlan-interface 1.
[Sysname-rip-1] filter-policy ip-prefix abc export Vlan-interface 1
filter-policy import (RIP view)
Syntax
filter-policy { acl-number | gateway ip-prefix-name | ip-prefix ip-prefix-name [ gateway
ip-prefix-name ] } import [ interface-type interface-number ]
undo filter-policy import [ interface-type interface-number ]
View
RIP view
Default Level
2: System level
Parameters
acl-number: Number of the ACL used for filtering incoming routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name: References an IP prefix list to filter incoming routes. The ip-prefix-name is a
string of 1 to 19 characters.
gateway ip-prefix-name: References an IP prefix list to filter routes from the gateway. ip-prefix-name is
a string of 1 to 19 characters.
interface-type interface-number: Specifies an interface by its interface type and interface number.
Description
Use the filter-policy import command to filter the incoming routes.
Use the undo filter-policy import command to restore the default.
By default, RIP does not filter incoming routes.
Related commands: acl and ip ip-prefix.
Examples
# Reference ACL 2000 to filter incoming routes.
<Sysname> system-view
[Sysname] rip 1