3com S7906E Guide De Référence

Page de 2327
 
1-13 
# Redistribute OSPF routes with the cost being the default cost. 
[Sysname-rip-1] import-route ospf 
maximum load-balancing (RIP view) 
Syntax 
maximum load-balancing number 
undo maximum load-balancing 
View 
RIP view 
Default Level 
2: System level 
Parameters 
number: Maximum number of load balanced routes, in the range 1 to 4. 
Description 
Use the maximum load-balancing command to specify the maximum number of load balanced routes 
in load sharing mode. 
Use the undo maximum load-balancing command to restore the default. 
By default, the maximum number of load balanced routes is 4. 
Examples 
# Specify the maximum number of load balanced routes as 2. 
<Sysname> system-view 
[Sysname] rip 
[Sysname-rip-1] maximum load-balancing 2 
network 
Syntax 
network network-address 
undo network network-address 
View 
RIP view 
Default Level 
2: System level 
Parameters 
network-address: IP address of a network segment, which can be the IP network address of any 
interface.