3com S7906E Guide De Référence
1-17
rip
Syntax
rip [ process-id ] [ vpn-instance vpn-instance-name ]
undo rip [ process-id ] [ vpn-instance vpn-instance-name ]
View
System view
Default Level
2: System level
Parameters
process-id: RIP process ID, in the range of 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies a VPN instance name, a string of 1 to 31 case-sensitive
characters.
Description
Use the rip command to create a RIP process and enter RIP view.
Use the undo rip command to disable a RIP process.
By default, no RIP process runs.
Note that:
z
If no VPN instance is specified, the RIP process will run under public network instance.
z
You must create a VPN instance before you apply a RIP process to it. For related configuration,
refer to the ip vpn-instance command.
z
You must enable the RIP process before configuring the global parameters. This limitation is not for
configuration of interface parameters.
z
The configured interface parameters become invalid after you disable the RIP process.
Examples
# Create a RIP process and enter RIP process view.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1]
rip authentication-mode
Syntax
rip authentication-mode { md5 { rfc2082 key-string key-id | rfc2453 key-string } | simple password }
undo rip authentication-mode
View
Interface view