3com S7906E Guide De Référence

 

1-6 

[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2 

default-cost cost 

OSPF area view 

2: System level 

cost: Specifies a cost for the default route advertised to the Stub or NSSA area, in the range 0 to 

16777214. 

Use the default-cost command to configure a cost for the default route advertised to the stub or NSSA 

area. 

Use the undo default-cost command to restore the default value. 

The cost defaults to 1. 

This command is only applicable to the ABR of a stub area or the ABR/ASBR of an NSSA area. 

Related commands: stub, nssa. 

# Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area 

as 20. 

<Sysname> system-view 

[Sysname] ospf 100  

[Sysname-ospf-100] area 1 

[Sysname-ospf-100-area-0.0.0.1] stub 

[Sysname-ospf-100-area-0.0.0.1] default-cost 20 

default-route-advertise [ [ always | cost  cost  | type  type  |  route-policy  route-policy-name  ] * | 

summary cost cost ] 

undo default-route-advertise 

OSPF view