3com S7906E Guide De Référence

 

1-29 

Total Nets 

Total networks 

Intra Area 

Total intra-area routes 

Inter Area 

Total inter-area routes 

ASE 

Total ASE routes 

NSSA 

Total NSSA routes 

 

display ospf [ process-id ] vlink 

Any view 

1: Monitor level 

process-id: OSPF process ID, in the range 1 to 65535. 

Use the display ospf vlink command to display OSPF virtual link information. 

If no OSPF process is specified, the OSPF virtual link information of all OSPF processes is displayed. 

# Display OSPF virtual link information. 

<Sysname> display ospf vlink 

          OSPF Process 1 with Router ID 3.3.3.3 

                  Virtual Links 

 

 Virtual-link Neighbor-ID  -> 2.2.2.2, Neighbor-State: Full 

 Interface: 10.1.2.1 (Vlan-interface1) 

 Cost: 1562  State: P-2-P  Type: Virtual 

 Transit Area: 0.0.0.1 

 Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1 

Table 1-16 display ospf vlink command output description 

Virtual-link Neighbor-id 

ID of the neighbor connected to the router via the virtual link 

Neighbor-State 

Neighbor State: Down, Init, 2-Way, ExStart, Exchange, Loading, Full. 

Interface 

Local interface’s IP address and name of the virtual link 

Cost 

Interface route cost