3com S7906E Guide De Référence

 

1-33 

filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ] 

undo filter-policy export [ protocol [ process-id ] ] 

OSPF view 

2: System level 

acl-number: Number of an ACL used to filter redistributed routes, in the range 2000 to 3999. 

ip-prefix-name: Name of an IP prefix list used to filter redistributed routes, a string of up to 19 

characters. 

protocol: Specifies a protocol from which to filter redistributed routes. The protocol can be direct, static, 

rip, ospf, isis or bgp. If no protocol is specified, all redistributed routes are filtered. 

process-id: Process ID, which is required when the protocol is rip, ospf or isis, in the range 1 to 65535. 

Use the filter-policy export command to configure the filtering of redistributed routes. 

Use the undo filter-policy export command to disable the filtering. 

By default, the filtering of redistributed routes is not configured. 

You can use this command to filter redistributed routes as needed. 

Related commands: import-route. 

# Filter redistributed routes using ACL2000. 

<Sysname> system-view 

[Sysname] ospf 100 

[Sysname-ospf-100] filter-policy 2000 export 

filter-policy { acl-number | ip-prefix ip-prefix-name | gateway ip-prefix-name } import 

undo filter-policy import 

OSPF view 

2: System level